"instax SHARE" is FUJIFILM official application that can be used to print images from smartphones to instax SHARE smartphone printer.
[Select Your Best Shot!]
"instax SHARE" is an app to print images from your smartphone with the smartphone printer instax SHARE SP-1/SP-2/SP-3(FUJIFILM). You can enjoy beautiful instax print by simply selecting best shots in your smartphone or tablet within less than a minute.
[Supported Printer]
FUJIFILM instax SHARE Smartphone Printer SP-1/SP-2/SP-3
* Not support to old model printers.
[Supported Smartphones]
Android 4.0.3 or later
*With regard to customers who use Android ver. 6.0.x or later, there is a case that the connection between the smartphone and the printer does not work if GPS function is OFF. For the customer corresponding to this phenomenon, please turn on the GPS function when you use instax SHARE.
CAUTION: SETTINGS
If you are using Android 6.0 or later and cannot connect to the printer, check the following settings.
(1) GPS Settings
It is sometimes not possible to connect to the printer when the GPS function of your Android device is turned off.Follow the steps below to turn your GPS function on.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting".
(2) Tap "Location".
(3) If "Position Information" is off, turn it on.
(4) Try connecting to the printer.
(5) If communication is still not possible after performing steps (1) to (3), turn the position information setting in (3) off and back on again, then try connecting to the printer again.
(2) Authority settings in the "instax SHARE" app
Some or all of the functions of the "instax SHARE" app cannot be used unless the following authority settings are enabled for the app.
Please follow the steps below to enable these authority settings. We apologize for the inconvenience.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting"
(2) Tap "Apps"
(3) Tap "instax SHARE"
(4) Tap "Permission"
(5) Enable "Camera", "Storage" and "Location".
[How to print]
Print photos taken with smartphones.
1. Turn on the printer.
2. Launch the instax SHARE app.
3. Select image from Photos or SNS, or take photo with a smartphone camera.
4. Once image is selected, press Edit and edit the image (scaling, rotate, filter and template).
5. Post message on a template if template which accepts text is selected.
6. Press "Connect and print." when editting is completed.
7. When you print for the first time, will be asked password for the printer, please enter initial password that is wrote in User's Guide of the printer.
"به اشتراک گذاری Instax فوجی فیلم" نرم افزار رسمی FUJIFILM است که می تواند مورد استفاده برای چاپ تصاویر از گوشی های هوشمند به Instax فوجی فیلم چاپگر گوشی های هوشمند به اشتراک بگذارید.
[انتخاب کنید بهترین شات خود را!]
"به اشتراک گذاری Instax فوجی فیلم" برنامه برای چاپ تصاویر از گوشی های هوشمند خود را با گوشی های هوشمند Instax فوجی فیلم چاپگر به اشتراک SP-1 / SP-2 / SP-3 (FUJIFILM). شما می توانید زیبا Instax فوجی فیلم چاپ به سادگی با انتخاب بهترین عکس ها در گوشی های هوشمند و یا قرص خود را در کمتر از یک دقیقه لذت ببرید.
[چاپگر پشتیبانی شده]
FUJIFILM Instax فوجی فیلم سهم گوشی های هوشمند پرینتر SP-1 / SP-2 / SP-3
* به پرینتر مدل قدیمی پشتیبانی نمی کند.
[پشتیبانی گوشیهای هوشمند]
آندروید 4.0.3 و یا بعد از
* با توجه به مشتریان که با استفاده نسخه آندروید. 6.0.x و یا بعد از، یک مورد که ارتباط بین گوشی های هوشمند و چاپگر کار نمی کند اگر تابع GPS خاموش است وجود دارد. برای مشتری مربوط به این پدیده، لطفا به نوبه خود بر عملکرد GPS در هنگام استفاده از به اشتراک گذاری Instax فوجی فیلم.
احتیاط: تنظیمات
اگر شما به استفاده از آندروید 6.0 و یا بعد و نمی تواند به چاپگر اتصال، تنظیمات زیر را تیک بزنید.
(1) GPS تنظیمات
گاهی اوقات ممکن است به اتصال به چاپگر هنگامی که از عملکرد GPS دستگاه آندروید خود را تبدیل off.Follow مراحل زیر را به نوبه خود تابع GPS خود را در.
به عنوان مثال: جلد محافظ Nexus7 (آندروید 6.0.1)
(1) شیر "تنظیمات".
(2) شیر "محل سکونت".
(3) اگر "اطلاعات موقعیت" خاموش است، آن را روشن کنید.
(4) سعی کنید اتصال به چاپگر.
(5) اگر ارتباطات است که هنوز هم پس از انجام مراحل (1) به (3)، به نوبه خود اطلاعات موقعیت تنظیم در (3) خاموش و دوباره روشن کنید، سپس سعی کنید اتصال به چاپگر دوباره امکان پذیر نیست.
(2) تنظیمات خودگردان در "به اشتراک گذاری Instax فوجی فیلم" برنامه
همه یا برخی از توابع از "Instax فوجی فیلم SHARE" برنامه می تواند استفاده شود مگر اینکه تنظیمات اقتدار زیر برای برنامه را فعال کنید.
لطفا مراحل زیر را برای فعال کردن این تنظیمات اقتدار دنبال کنید. از اینکه به زحمت افتادید پوزش میخواهیم.
به عنوان مثال: جلد محافظ Nexus7 (آندروید 6.0.1)
(1) شیر "تنظیمات"
(2) شیر "نرم افزار"
(3) شیر "به اشتراک گذاری Instax فوجی فیلم"
(4) شیر "مجوز"
(5) فعال کردن "دوربین"، "ذخیره سازی" و "محل سکونت".
[چگونه برای چاپ]
عکس های چاپ گرفته شده با گوشی های هوشمند.
1. چاپگر را روشن.
2. راه اندازی برنامه Instax فوجی فیلم به اشتراک بگذارید.
3. تصویر از عکس و یا SNS، و یا گرفتن عکس با دوربین گوشی های هوشمند.
4. هنگامی که تصویر انتخاب شده است، ویرایش فشار دهید و ویرایش تصویر (پوسته پوسته شدن، چرخش، فیلتر و قالب).
5. پیام پست در قالب اگر قالب است که می پذیرد متن انتخاب شده است.
6. مطبوعات "اتصال و چاپ." وقتی editting کامل شده است.
7. هنگامی که شما برای اولین بار چاپ، رمز عبور برای چاپگر خواسته شود، لطفا رمز عبور اولیه است که در راهنمای کاربر چاپگر نوشت را وارد کنید.